385
TAG NOT FOUND Error in RFID Write/Read
Command
(1) Feed direction
(2) The dump for the first 16 or 32 bytes of the write data
The layout of a tag error print (horizontal position of reference point) varies according to the product
orientation as shown below. The vertical position of the reference point and print content do not
change.
Standard/Left-Hand Type Opposite/Right-Hand Type
(1) Feed direction
The types of errors to print are as follows:
Message Cause and Countermeasure
TAG NOT FOUND
Error Message 1114 (Tag not Found) (S84NX Only)
To Next Page
Loading...