SATO S84NX - Page 428

[Applications] Menu
428
Initial ValueSetting Item
S84NX S86NX
Initialized
by User
Reset/
Factory
Reset
[Format Save] [Enabled] Yes/Yes
• [SDPL]/[AEP]
Initial ValueSetting Item
S84NX S86NX
Initialized
by User
Reset/
Factory
Reset
[SDPL]
[Control Code]
[Code Type] [Standard] Yes/Yes
[SOH] 01 Yes/Yes
[STX] 02 Yes/Yes
[CR] 0D Yes/Yes
[CNTBY] 5E Yes/Yes
[Label Rotation] [0 degree] Yes/Yes
[SOP Emulation] [Auto] Yes/Yes
[Compatible Mode]
[TTF] [Disabled] Yes/Yes
[Graphics] [Disabled] Yes/Yes
[Compression] [Disabled] Yes/Yes
[Right-to-Left print] [Auto] Yes/Yes
[Receive TimeOut] 0 (Off) Yes/Yes
[Blank Item Feed] [Enabled] Yes/Yes
[Prioritize]
[Format Attribute] [Commands] Yes/Yes
[Pause Mode] [Commands] Yes/Yes
[1 Byte Codepage] [Commands] Yes/Yes