513
Error Message 1077 (Barcode Reader Connection Error)
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Connect the barcode checker, or press the button (OFFLINE) or button.
Cause and Countermeasure Reference
Cause
◦ Could not check the connection of the
barcode checker.
◦ Communication between the barcode
checker and the product fails.
Countermeasure
Check the barcode checker, and connect it
correctly.
If you do not use the barcode check function,
disable the barcode check mode.
Mode
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble
To Next Page
Loading...