515
Error Message 1079 (Barcode Reading Error (Checking Start Position
Abnormality))
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Press the button (OFFLINE) or button. The product changes to Offline mode while
keeping the print job.
Cause and Countermeasure Reference
Cause
A value larger than the loaded media length is
specified for checking start position.
Countermeasure
◦ Check the layout for printing.
◦ Set a value smaller than the loaded
media length for checking start position.
Start Position
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble
To Next Page
Loading...