529
Error Message 1141 (Printing was aborted halfway)
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Press the button (OFFLINE) or button to switch to Offline mode.
Then, press the button to feed and eject the labels that have been printed halfway through.
Cause and Countermeasure
Cause
In dispense & print mode, printing was interrupted by a cancel operation or error.
Countermeasure
Press the button (OFFLINE) or button to switch to Offline mode, and then press
the button to feed and eject the labels that have finished printing part way.
Contact your SATO technical support if the error cannot be resolved.
Contact Information for When You Are in Trouble
To Next Page
Loading...