SATO S84NX - Page 547

547
Pin No.
25-
pin
14-
pin
I/O Description Electric Conditions
(Voltage, Current (Max))
20 5
Input
2
Print Start signal (PRIN)
Prints one media when a low signal is
detected.
High: high impedance
Low: more than -5 mA, 0 V
21 11
Input
2
Feed signal
Media feeds when a low signal is
detected.
High: high impedance
Low: more than -5 mA, 0 V
22 -
Input
2
Reserve High: high impedance
Low: more than -5 mA, 0 V
23 -
Input
2
Reserve High: high impedance
Low: more than -5 mA, 0 V
24 13 Input
IN_COM
1
Power supply from peripherals
5 V - 24 V or GND
25 - -
GND
Reference Signal Ground
-
1
When using the 14-pin conversion cable, do not connect the power pin to "IN_COM" pin. The "IN
COM" pin is connected to 5 V in cable.
2
These input signal terminals can be connected to the open collector input devices.
3
If 25-pin is selected, the total output of Pin No. 2 and 12 will be 600 mA.
RFID specifications (S84NX only)
(S84NX only) For the RFID model, the signals indicated in bold text in the table below are settings that
differ from the standard specifications.
Pin No.
25-
pin
14-
pin
I/O Description Electric Conditions
(Voltage, Current (Max))
1 14 - Frame Ground -
2 - - Power source +5 V
600 mA
3