SATO S84NX - Page 548

Connector Pin Specifications of External Signal (EXT) Interface
548
Pin No.
25-
pin
14-
pin
I/O Description Electric Conditions
(Voltage, Current (Max))
3 - Output
Home Position signal
Outputs a signal when [Backfeed] in
the [Printing] menu is set to [Controled]
and backfeed is done.
40 V
80 mA
4 4 Output
Machine Error/RFID Error
Outputs a low signal when an error,
such as cover open, head error, or
communication error, is detected.
Or, outputs a low signal when an
RFID system error occurs.
40 V
80 mA
5 6 Output
Print Done/Print End signal (PREND)
Outputs a signal when the media print
is completed.
40 V
80 mA
6 9 Output
Print Ready signal
Outputs a high signal when the product
is in Online mode and ready for
printing.
40 V
80 mA
7 -
Input
2
Label Near End signal
The product becomes label near end
status when a low signal is detected.
High: high impedance
Low: more than -5 mA, 0 V
8 7
Input
2
Reprint signal (PRIN2)
Prints the previously printed content
again when a low signal is detected.
High: high impedance
Low: more than -5 mA, 0 V
9 -
Input
2
Backfeed order signal (DISPENSE IN)
When [Backfeed] in the [Printing]
menu is set to [Controled], backfeed
is performed when a low signal is
detected.
High: high impedance
Low: more than -5 mA, 0 V
10 -
Input
2
Reserve High: high impedance
Low: more than -5 mA, 0 V
11 - -
OUT_COM
Ground of peripherals
-