SBC PCD2 Series User Manual

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
6-52
I/O modules PCD3
PCD3.A860
6
Specialcase:
If both keys are pressed together and held down, Relay 0 will switch on and the
long ("hold") movement will be executed. When the time has expired, Relay 1 will
switch on immediately, and a long movement in the reverse direction will occur.
Lightfunction
With the light function, a skylight is connected to each of Outputs O Ø and O 1.
Activatinganinput/keyswitchestherelevantoutputonoro󰀨.Eachpulseatthe
input switches the output over (toggling).
Where multiple keys are provided for a skylight, they can be wired in parallel to the
same output.
Transparentfunction
In transparent mode, the inputs/outputs are not interlocked. The card is used like a
digital I/O card, except that it is controlled via an FBox.
RIOoperation
The switches/keys cannot be read via “Monitorio”.
Operationinanxx7control
To use the module in an xx7 control requires FBs, which can be provided later on
request. They do not have to be implemented in the "IO Builder".

SBC PCD2 Series Specifications

General

Brand	SBC
Model	PCD2 Series
Category	I/O Systems
Language	English