SBC PCD2 Series - Page 86

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
5-77
I/O modules PCD1|PCD2
PCD2.W3x5
5
Classic: For programming the modules, an FBox is available.
xx7andRIOs: thermwarereadsinthevaluesaccordingtotheconguration
(I/OBuilderornetworkcongurator)
Watchdog:Thismodulecanbeusedonallbaseaddresses;thereisno
interaction with the watchdog on the CPUs. For details, please refer to the
section A4 “Hardware Watchdog”, which describes the correct use of the
watchdog in conjunction with PCD components.