Shimadzu AP W-AD Series User Manual

91
1
3
5
2
4
6
7
8
12
14
13
9
10
11
77 ApplicationsApplications
4. Place the sample in the container
(1) Place the sample in the container, and then weigh
it.
(2) Read the quantity of the sample.
Changing the Piece counting measurement Sample Settings
1. Start Piece counting measurement mode setting
Press [ MENU].
2. Set the unit weight
(1) Select [Changing Registration] and then press
[ OK].
(2) Enter the sample name.
(3) Enter the quantity for the setting.
(4) The weight measurement screen will be displayed
for sample measurement purposes. Measure the
set quantity, and then press [ OK].
(5) The unit weight value will be amended, and the
registered details will be displayed.
3. Return to the weight measurement mode
Press [ POWER].

Shimadzu AP W-AD Series Specifications

General

Brand	Shimadzu
Model	AP W-AD Series
Category	Laboratory Equipment
Language	English