Engineering via SICAM WEB
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 353
DC8-037-2.02, Edition 10.2017
9.1.11.1.2 Automatic Filling and Automatic Incrementation
This function provides a quick and easy creation of multiple signals.
Example: You have created 10 new signals. The IOA1 of the first signal shall start with 3. The
value of all subsequent signals shall be consecutively increased by 1.
• Set a mark in the checkbox left beside the desired rows (you can also mark all rows by
means of the checkbox above the left-most column)
• Set a mark in the checkbox above the IOA1 column
• Enter the value 3 in the input field START AT (this field is always preset with the cross
value of the selected column and the first selected row)
• Enter the value 1 in the input field STEP
• Click on the button (FILL SELECTED)
Result: The IOA1 of all subsequent signals is consecutively increased by the value 1.