Service
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 485
DC8-037-2.02, Edition 10.2017
The following signals can be defined by means of parameter as process event and/or process
alarm (refer to 9.1.11.2.1, Configurable Logging and Display of Signal States):
Type of signal Designation Type identifier
(TI)
Process
event
Process
alarm
Single point information SI TI 30 ü ü
Double point information DI TI 31 ü ü
Single command SC TI 45 ü
Double command DC TI 46 ü
The following diagnosis events and diagnosis alarms (sum errors) are generated by the de-
vice and entered in the list. These diagnosis events cannot be parameterized:
Event process text Meaning Diagno-
sis event
Diagno-
sis alarm
Dia IntError Internal error ü ü
Dia ExtError External error ü ü
Dia ComError Communication error ü ü
Dia Test Test ü ü
Dia Warning Warning ü ü
Dia BoardFail Board failure ü ü
Dia Restart Restart ü ü
11.1.2.4.1 Events | ALL Events
The submenu Events is devided in the sub-
menus
• All Events
• DEF Events (process events)
• DIA Events (diagnosis events)
To Next Page
Loading...
Need help?
General
