Engineering via SICAM WEB
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 453
DC8-037-2.02, Edition 10.2017
9.3.3.1 Loading Device Settings Offline
For the duplication of an already existing parameterization, you can write the data also without
target device (offline) on a SD card with the program Sicam_first_startup.
Thereto a backup file created with the function Save device settings via SICAM WEB must
exist (file type .cmc). Further you need a read/write device for SD cards connected on the en-
gineering PC, a corresponding driver installed on the PC (if needed), as well as a suitable SD
card.
• Insert the SD card into the read/write device
• Start the program Sicam_first_startup per double click
The Sicam_first_startup splash screen is opened, and the Sicam_first_startup symbol appears in
the notification area of the taskbar:
• Click on the splash screen in order to close it
• Click then with the right mouse button on the Sicam_first_startup symbol
The context menu of Sicam_first_startup is opened:
• Change the language if needed and open the context menu again
• After that click on Write flash card from A8000 parameter file
To Next Page
Loading...
Need help?
General
