Service
490 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
11.1.2.4.5 Cockpit
The submenu Cockpit is devided in freely de-
finable groups.
Under each group, the status of signals as-
signed to the group can be read:
• Binary information (process data message)
• Measured values (process data measured
value)
The groups and their assigned signals are de-
fined via the engineering tool (SICAM WEB:
refer to section 9.1.11.2.1, Configurable Logging
and Display of Signal States).
You can navigate through the entire list via function keys ▼ and ▲
You can open the selected group with the function key OK.
Under the opened group the respectively as-
signed signals appear with the status display.
Example: binary information items
In this example, 3 binary information items are
assigned to the group positions 1, 3 and 4.
Position 2 is not assigned.
Example: measured values
In this example, 2 measured values are as-
signed to the group positions 1 and 5.
Positions 2, 3 and 4 are not assigned.
To Next Page
Loading...
