Function Packages
62 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
3.1.13 Storage of Firmware
Current firmware revisions for CP-8000/CP-802x can be loaded as binary files
• online into a target system with an equipped SD card
• offline through storage on a suitable SD card
In both cases, the target system unpackes the corresponding files and stores the firmwares in
the main memory during startup.
3.1.14 Autonomy
This system concept ensures that, if central parts succumb to a failure, as much of the func-
tionality as possible will remain intact. CP-8000/CP-802x is capable of functioning autono-
mously – this means, it will continue carrying out its defined local function even where the en-
tire communication is disturbed.
In such events, the system invariably ensures that the failure is detected and signaled. Based
thereon, a functional behavior may be defined, if necessary, that is adapted to the disturbance
event at hand.
To Next Page
Loading...
Need help?
General
