Siemens CP-8021 - Assigning Signals to the I;O Master Module

Engineering via SICAM WEB
366 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
9.1.11.3 Assigning Signals to the I/O Master Module
If you have already defined signals, these can be assigned to the I/O Master Module for the
further processing.
This is how to assign signals to the I/O Master Module:
• Click on the button right above in order to close the work area for the signal genera-
tion
• Select the directory SICAM A8000 CP-80xx | Master Module | I/O Master Module
• Mark on the right side the signals to be assigned
• Click on the button (Assign)
The assigned signals are now listed in a table under the tab Assignment.