Service
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 503
DC8-037-2.02, Edition 10.2017
11.3.3 SICAM WEB
11.3.3.1 Connection Possibilities for the Diagnosis
For the access to the diagnosis data of CP-8000/CP-802x, an online connection of the engi-
neering PC to the target device is required. Reading access is also possible if the target de-
vice was engineered via the SICAM TOOLBOX II. Writing access (example: startup request to
the target device) is only exclusively possible.
You find the basic connection possibilities in section 7.7.2, SICAM WEB. Following you find
some application examples.
Direct Connection
-232
To Next Page
Loading...
Need help?
General
