Siemens CP-8021 User Manual

Service
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 519
DC8-037-2.02, Edition 10.2017
11.5 Firmware Update
In CP-8000/CP-802x, a new system element or the functionality of a system element can be
updated in need. For each system element, an individual loadable firmware is provided. You
find information thereto in section 7.3, Loadable Firmwares.
For the accomplishment of firmware updates different methods are possible:
• Engineering via SICAM TOOLBOX II
─ online
─ offline
• Engineering via SICAM WEB
─ online
─ offline
11.5.1 SICAM TOOLBOX II
The SICAM TOOLBOX II contains after its installation all current firmware revisions (based on
the date of issue of the installed version).
Procedure for the Update of System Elements
11.5.1.1 Interrogation of the Firmware Revision
The firmware revisions of all configured system elements (Master Module, I/O Master Module,
protocol elements) can be displayed and printed with the tool "Revision Interrogation and Dis-
play" for a selected automation unit.
You find further details on the tool in the SICAM TOOLBOX II Online Help, chapter "Service
Programs", section "Revision Interrogation and Display".
interrogate firm-
ware revision
new firmware
available
import master
data
update target
system
load
firmware
master data
update
revision
interrogation
selection AU
Save firmware file on
TOOLBOX PC
select firmware file to
be imported
selection AU
open
start import
load

Siemens CP-8021 Specifications

General

Brand	Siemens
Model	CP-8021
Category	Controller
Language	English