Siemens CP-8021 User Manual

Preface
8 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
Information on Conformity
The product described conforms to the regulations of the following European Directives:
• 2014/30/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization of
the laws of the Member States relating to electromagnetic compatibility; Official Journal of the EU L96,
29/03/2014, p. 79–106
• 2014/35/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonization of
the laws of the Member States relating to the making available on the market of electrical equipment
designed for use within certain voltage limits; Official Journal of the EU L96, 29/03/2014, p. 357–374
• 2014/53/EU (applies for CP-8022)
Directive of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the
laws of the Member States relating to the making available on the market of radio equipment and repeal-
ing Directive 1999/5/EC; Official Journal of the EC L153, 22/05/2014, p. 62–106
• 2011/65/EU
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment; Official Journal of the EU L174,
01/07/2011, p. 88–110
The conformity of the product with the regulations of the above mentioned directives is proven through the
observance of the following harmonized standards:
• EN 60870-2-1:1996 for 2014/30/EU
• EN 61010-1:2010 for 2014/35/EU
• EN 301489-1:2011 and EN 301511:2003 for 2014/53/EU
• EN 50581:2012 for 2011/65/EU
This declaration certifies the conformity with the specified directives, but is not an assurance of character-
istics in the sense of the product liability law.
The product is intended exclusively for use in an industrial environment.
Maintenance, Cleaning and Disposal
• Maintenance
─ The device is maintenance-free.
─ With handling on the bus – or its vicinity – a sufficient ESD protection must be consid-
ered.
• Cleaning
─ If necessary, wish the device with a clean, dry, soft and fluff-free cotton cloth.
─ Detergents may cause damage. Do not use a detergent.
─ Humidity and wetness may impair the functionality of the components. Make sure that
humidity or wetness does not enter into the device.
• Disposal
─ For the disposal of the device it is necessary to observe the local and national direc-
tives.

Siemens CP-8021 Specifications

General

Brand	Siemens
Model	CP-8021
Category	Controller
Language	English