Siemens FST020 - 3 Rd Process Value; 4 Th Process Value

Setup
3.9 View 2
FST020 Function manual
98 Function Manual, 09/2017, A5E42949526-AA
3.9.5
3rd process value
Description
The display
3rd Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Fluid Temperature
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 2 → 3rd Process Value
3.9.6
4th process value
Description
The display
4th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Volumeflow
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 2 → 4th Process Value
3.9.7
5th process value
Description
The display
5th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Totalizer 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 2 → 5th Process Value