Siemens FST020 - View; 1 St Value

Setup
3.10 View 3
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
101
Related
If Enabled is selected, all parameters for View 3 must be configured.
Path
Setup → Display → View 3 → Enable or disable
3.10.2
View
Description
The display View 3 can be configured.
Setting
Single value; Three values; Totalizer; Dosing; 1 value and bargraph; 1 value and graph;
Six values; Six diagnostic values; Alarm list
Default
1 value and bargraph
Related
If Single value or Dosing is selected,
1st process value
must be configured.
If Three values is selected,
1st process value
,
2nd process value
and
3rd process value
must be configured.
If Totalizer or 1 value and graph is selected,
1st process value
,
Trend scale mode
and
Trend
log time window
must be configured.
If 1 value and bargraph is selected,
1st process value
must be configured.
If Six values or Six diagnostic values is selected,
1st process value
,
2nd process value
,
3rd
process value
,
4th process value
,
5th process value
, and
6th process value
must be
configured.
Path
Setup → Display → View 3 → View
3.10.3
1st value
Description
The display
1st Process Value
can be selected. This process value is shown in all view
types.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium Temperature
Default
Volume flow
Related
Path
Setup → Display → View 3 → 1st Value