Siemens FST020 - Custom Conversion Factor; Decimal Places; Alarm Warning Limits

Setup
3.2 Process values
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
51
3.2.5.3
Custom conversion factor
Description
Conversion factor for custom Density values based on SI density units kg/m
3
.
Setting
Default
1.0
Related
Path
Setup → Process values → Density → Custom conversion factor
3.2.5.4
Decimal places
Description
Sets the decimal places for the process value displayed in the local display.
Setting
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
Default
2 decimal places
Related
Path
Setup → Process values → Density → Decimal places
3.2.5.5
Alarm warning limits
3.2.5.5.1 Upper alarm limit
Description
If density value exceeds this limit an alarm is triggered.
Setting
0.00 kg/m³ to +10000.00 kg/m³
Default
900.00 kg/m³
Related
Path
Setup → Process values → Density → Alarm and warning limits → Upper alarm limit
3.2.5.5.2 Upper warning limit
Description
If density value exceeds this limit a warning is triggered.