Siemens FST020 - 5 Th Value; Trend Scale Mode

Setup
3.11 View 4
FST020 Function manual
108 Function Manual, 09/2017, A5E42949526-AA
3.11.7
5th value
Description
The display
5th Process Value
can be selected.
Setting
Transmitter internal temperature; Reynolds number; RxGain up path 1; RxGain down path
1; SNR up path 1; SNR down path 1; Sound velocity path 1; Flow velocity path 1; Delta
time path 1; Travel time up path 1; Travel time down path 1; Correlation factor path 1; Per-
centage of bursts accepted path1; Peak amplitude up path 1; Peak amplitude down path 1;
Min acc travel time path 1; Min acc travel time path 1; Max acc travel time path 1
Default
Peak amplitude up path 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 4 → 5th value
3.11.8
6th value
Description
The display
6th Process Value
can be selected.
Setting
Transmitter internal temperature; Reynolds number; RxGain up path 1; RxGain down path
1; SNR up path 1; SNR down path 1; Sound velocity path 1; Flow velocity path 1; Delta
time path 1; Travel time up path 1; Travel time down path 1; Correlation factor path 1; Per-
ce
ntage of bursts accepted path1; Peak amplitude up path 1; Peak amplitude down path 1;
Min acc travel time path 1; Min acc travel time path 1; Max acc travel time path 1
Default
Flow velocity path 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 4 → 6th value
3.11.9
Trend scale mode
Description
The
Trend Scale Mode
can be selected with automatic scaling or fixed scaling.
Setting
Auto; Fixed
Default
Auto