Siemens FST020 - Alarms

Maintenance and diagnostics
4.8 Simulation
FST020 Function manual
166 Function Manual, 09/2017, A5E42949526-AA
Related
If
Simulation mode
is set to Simulate alarm (ID number),
Alarms
and its subcategories will be
available.
If
Simulation mode
is set to Simulate alarm class,
Alarm class
will be available.
Path
Maintenance and diagnostics → Simulation → Simulation alarms → Simulation mode
4.8.3.2
Alarms
4.8.3.2.1 Sensor alarms (1)
Description
The simulation of single and multiple
Sensor alarms (1)
can be configured.
Setting
Various sensor alarms can be selected
Default
None selected
Related
This parameter is only available if
Simulation mode
is set to Simulate alarm (ID number).
Path
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Sensor alarms
(1)
4.8.3.2.2 Sensor alarms (2)
Description
The simulation of single and multiple
Sensor alarms (2)
can be configured.
Setting
Various sensor alarms can be selected
Default None selected
Related
This parameter is only available if
Simulation mode
is set to Simulate alarm (ID number).
Path
Maintenance and diagnostics → Simulation → Simulation alarms → Alarms → Sensor alarms
(2)
4.8.3.2.3 Process alarms (1)
Description
The simulation of single and multiple
Process alarms (1)
can be configured.