Siemens FST020 - Trend Log Time Window; Trend Scale Lower Limit; Trend Scale Upper Limit

Setup
3.11 View 4
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
109
Related
This parameter is only available if
View
is set to Totalizer or 1 Value and Graph.
If Fixed is selected,
Trend Scale Lower Limit
and
Trend Scale Upper Limit
must be
configured.
Path
Setup → Display → View 4 → Trend Scale Mode
3.11.10
Trend log time window
Description
The
Trend log time window
logging period (time axis length) can be selected.
Setting 1 Minute; 5 Minutes; 15 Minutes; 30 Minutes; 1 Hour; 2 Hours; 3 Hours
Default
5 Minutes
Related
This parameter is only available if
View
is set to Totalizer or 1 Value and Graph.
Path
Setup → Display → View 4 → Trend log time window
3.11.11
Trend scale lower limit
Description
The
Trend Scale Lower Limit
defines the scaling lower limit of the value axis for the fixed
mode.
Setting
Default
0
Related
This parameter is only available if
Trend Scale Mode
is set to Fixed.
Path Setup → Display → View 4 → Trend Scale Lower Limit
3.11.12
Trend scale upper limit
Description
The
Trend Scale Upper Limit
defines the scaling upper limit of the value axis for the fixed
mode.