Siemens FST020 - PIN Recovery; Activate User PIN; Deactivate User PIN; Auto Logout

Security
6.4 PIN recovery
FST020 Function manual
182 Function Manual, 09/2017, A5E42949526-AA
6.4
PIN recovery
Used to enter PIN unlock key (PUK) which resets device PIN(s) to default. (PUK obtained
from Siemens customer support.)
Setting
Default
Related
Path
Security → Access management → PUK
6.5
Activate user PIN
Description
The
Enable access level control
function can be configured.
Setting
Disable; Enable
Default
Enable
Related
Path
Security → Access management → Enable access level control
6.6
Deactivate user PIN
Description
The
Disable access level control
function can be configured.
Setting Disable; Enable
Default
Enable
Related
Path
Security → Access management → Disable access level control
6.7
Auto logout
Description
The
Auto logout
function can be configured. When the parameter is set to Off (default), you
will
not
be prompted for password for 10 minutes after the last key press. When the