Siemens FST020 - Sound Velocity; Density; Kinematic Viscosity

Maintenance and diagnostics
4.8 Simulation
FST020 Function manual
164 Function Manual, 09/2017, A5E42949526-AA
4.8.2.5
Sound velocity
Simulation value
Description
Set the Sound velocity value to be simulated.
Setting
100.0 m/s to 25000.0
Default
1500.0 m/s
Related
Only if Sound velocity is marked in
Enable simulation
, then the setting of this parameter will
be relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Sound velocity
→ Simulation value
4.8.2.6
Density
Simulation value
Description
Set the Density value to be simulated.
Setting
0.0 kg/m
3
- 10000.0 kg/m
3
Default
1000.0 kg/m
3
Related
Only if Density is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Density → Simu-
lation value
4.8.2.7
Kinematic viscosity
Simulation value
Description
Set the Kinematic viscosity value to be simulated.