Siemens FST020 - Type of Upstream Condition; Upstream Distance; Type of Downstream Condition; Downstream Distance

Setup
3.1 Sensor settings
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
23
3.1.4.2
Type of upstream condition
Description
Compensation for upstream pipe geometry.
Setting Straight run; Single elbow; Double elbow (in-plane); Double elbow (out-of-plane); Reducer;
Expansion
Default
Straight run
Related
Path
Setup → Sensor settings → Upstream and downstream conditions → Type of upstream
condition
3.1.4.3
Upstream distance
Description
The distance to the upstream flow disturbance. The distance is given in pipe diameters.
Used for clamp-on flow profile compensation.
Setting
0 to 40
Default 0
Related
Path
Setup → Sensor settings → Upstream and downstream conditions → Upstream distance
3.1.4.4
Type of downstream condition
Description
Compensation for downstream pipe geometry.
Setting
Straight run; Single elbow; Double elbow (in-plane); Double elbow (out-of-plane); Reducer;
Expansion
Default
Straight run
Related
Path
Setup → Sensor settings → Upstream and downstream conditions → Type of downstream
condition
3.1.4.5
Downstream distance
Description
The distance to the downstream flow disturbance. The distance is given in pipe diameters.