Siemens FST020 - Totalizer Alarms; Device Alarms; Input;Output Alarms (1)

Setup
3.4 Inputs and outputs
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
77
3.4.3.8
Totalizer alarms
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
For hydrocarbon and gas applications only.
Setting 136 Totalizer 1 above alarm limit; 137 Totalizer 1 above warning limit; 138 Totalizer 1 -
below warning limit; 139 Totalizer 1 below alarm
Default
None
Related
Path
Setup → Inputs and outputs → Channel 3 - relay → Totalizer alarms
3.4.3.9
Device alarms
Description
Device alarms - If one of the selected events appears this affects the status icon, the related
status output, and the alarm on the communication interface.
Setting
148 Transm. temp. above alarm limit; 149 Transm. temp. below alarm limit; 150 Sensor
signal disrupted; 159 Internal error in transmitter
Default
None
Related
Path
Setup → Inputs and outputs → Channel 3 - relay → Device alarms
3.4.3.10
Input/output alarms (1)
Description
Selection of alarm items that impact the output. Applicable if Status mode = Alarm item.
Availability of certain settings depends on Hardware and Software configuration.