Siemens FST020 - 149 - Transm. Temp. below Alarm Limit; Maintenance; Copy Configuration; Spare Part Replacement

Maintenance and diagnostics
4.3 Maintenance
FST020 Function manual
136 Function Manual, 09/2017, A5E42949526-AA
4.2.8.3
149 - Transm. temp. below alarm limit
Description
This event can be mapped to an alarm class respective NAMUR status signal.
Setting
Process value alarm (PA) resp. Out of specification; Maintenance alarm resp. Failure
Default
Process alarm (PA) resp. Out of specification
Path
Maintenance and diagnostics → Diagnostic events → Assign alarm class → 149 - Transm.
temp. below alarm limit
4.3
Maintenance
4.3.1
Copy configuration
Description
Copy configuration - copy configurations from the SensorFlash to the device.
Setting
Cancel; OK
Default Cancel
Path
Maintenance and diagnostics → Maintenance → Copy configuration
4.3.2
Spare part replacement
4.3.2.1
Transmitter
4.3.2.1.1 Replace transmitter
Description
Only Siemens authorized personnel may replace spare parts.
Access level: Expert user only.
Setting
Cancel; OK
Default
Cancel