Siemens FST020 - Liner Settings

Setup
3.1 Sensor settings
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
21
Setting
200.0 m/s to 4000.0 m/s
Default
3000.0 m/s
Related
Path
Setup → Sensor settings → Pipe settings → Wall sound velocity
3.1.3.7
Liner settings
3.1.3.7.1 Liner thickness
Description
Pipe liner thickness
Setting
0.0 m to 0.5 m
Default
0.0 m
Related
Path
Setup → Sensor settings → Pipe settings → Liner settings → Liner thickness
3.1.3.7.2 Liner material
Description
Liner material - Read only. Can only be changed via the Sensor Wizard.
Setting
Read only: Custom; Cement; Coal tar; Enamel; Glass; Plastic; Hi_dens_Poly; PTFE; Rub-
ber
Default
Custom
Related
Path
Setup → Sensor settings → Pipe settings → Liner settings → Liner material
3.1.3.7.3 Liner sound velocity
Description
Liner material sound velocity (clamp-on).
Setting
200.0 m/s to 4000.0 m/s
Default
2000.0 m/s