Siemens FST020 - Temperature Code of the Sensor; Temperature Compensation Factor; Length of Sensor Cables

Setup
3.1 Sensor settings
FST020 Function manual
28 Function Manual, 09/2017, A5E42949526-AA
Related
Path
Setup → Sensor settings → Sensor selection → Spacing offset
3.1.6.10
Temperature code of the sensor
Description
Temperature code selections for sensors.
Setting
T1 (21°C), T2, T3
Default
T1 (21°C)
Related
Path
Setup → Sensor settings → Sensor selection → Temperature code of the sensor
3.1.6.11
Temperature compensation factor
Description
Temperature compensation factors for the sensors.
Setting
0.0001 to 0.0009
Default
0.000638
Related
Path
Setup → Sensor settings → Sensor selection → Temperature compensation factor
3.1.6.12
Length of sensor cables
Description
Length of sensor cable between transmitter/DSL and any sensors. All cables must have the
same length.
Setting
0.0 m to 20.0 m
Default
0.0 m
Related
Path
Setup → Sensor settings → Sensor selection → Length of sensor cables