Siemens FST020 - Mass Flow; Flow Velocity

Maintenance and diagnostics
4.8 Simulation
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
163
Related
Only if Volume flow is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path Maintenance and diagnostics → Simulation → Simulation process values → Volume flow →
Simulation value
4.8.2.3
Mass flow
Simulation value
Description
Set the Mass flow value to be simulated.
Setting -10800000000.000001 kg/h to +10800000000.000001 kg/h
Default
0.0 kg/h
Related
Only if Mass flow is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Mass flow →
Simulation value
4.8.2.4
Flow velocity
Simulation value
Description
Set the Flow velocity value to be simulated.
Setting
-400 m/s to +400 m/s
Default
0.0 m/s
Related
Only if Flow velocity is marked in
Enable simulation
, then the setting of this parameter will be
relevant.
The range and default setting are dependent on the selected
Unit.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Flow velocity →
Simulation value