Siemens FST020 - 3 Rd Value; 4 Th Value

Setup
3.11 View 4
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
107
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 4 → 2nd Value
3.11.5
3rd value
Description
The display
3rd Process Value
can be selected.
Setting
Transmitter internal temperature; Reynolds number; RxGain up path 1; RxGain down path
1; SNR up path 1; SNR down path 1; Sound velocity path 1; Flow velocity path 1; Delta
time path 1; Travel time up path 1; Travel time down path 1; Correlation factor path 1; Per-
centage of bursts accepted path1; Peak amplitude up path 1; Peak amplitude down path 1;
Min acc travel time path 1; Min acc travel time path 1; Max acc travel time path 1
Default
Sound velocity path 1
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 4 → 3rd Value
3.11.6
4th value
Description
The display
4th Process Value
can be selected.
Setting
Transmitter internal temperature; Reynolds number; RxGain up path 1; RxGain down path
1; SNR up path 1; SNR down path 1; Sound velocity path 1; Flow velocity path 1; Delta
time path 1; Travel time up path 1; Travel time down path 1; Correlation factor path 1; Per-
centage of bursts accepted path1; Peak amplitude up path 1; Peak amplitude down path 1;
Min acc travel time path 1; Min acc travel time path 1; Max acc travel time path 1
Default
Flow velocity path 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 4 → 4th Value