Siemens FST020 - Simulation Process Values; Enable Simulation; Volume Flow

Maintenance and diagnostics
4.8 Simulation
FST020 Function manual
162 Function Manual, 09/2017, A5E42949526-AA
Setting
0.0 pulses/s to 12500.0 pulses/s
Default
0.0
Operation mode is set to Pulse output
Related
Only if parameter
Simulation
is set to Enabled, then the setting of this parameter will be
relevant.
Path
Maintenance and diagnostics → Simulation → Simulation inputs and outputs → Channel 4 -
input/output → Simulation value
4.8.2
Simulation process values
4.8.2.1
Enable simulation
Description
Select the process value(s) to be simulated.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Medi-
um temperature
Default
None selected
Related
Only if process values are marked in this parameter, the setting of
Simulated value
under
each relevant process value becomes relevant.
Path
Maintenance and diagnostics → Simulation → Simulation process values → Enable simula-
tion
4.8.2.2
Volume flow
Simulation value
Description
Set the Volume flow value to be simulated.
Setting
-10800000000.0 m
3
/h to +10800000000.0 m
3
/h
Default
0.0 m
3
/h