Siemens FST020 - Calibration Picture

Maintenance and diagnostics
4.4 Diagnostics
FST020 Function manual
148 Function Manual, 09/2017, A5E42949526-AA
4.4.3.3.4 Pulse counter (read only)
Description
This parameter shows the number of pulses since startup/last reset.
Related
This parameter is only available if
Operation mode
is set to Pulse output.
Path Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 4 - in-
put/output → Pulse counter
4.4.3.3.5 Reset pulse counter
Description
The pulse counter can be reset.
Setting
Cancel; OK
Default
Cancel
Related
This parameter is only available if
Operation mode
is set to Pulse output.
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Channel 4 - in-
put/output → Reset pulse counter
4.4.3.4
Calibration picture
Description
Calibration picture
Setting
Default
mA
Related
Path
Maintenance and diagnostics → Diagnostics → Inputs and outputs → Calibration picture