Siemens FST020 - Modbus Units; Mass Flow Unit; Volume Flow Unit

Communication
5.2 Modbus (Channel 1)
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
177
Setting
Default
Related
Path
Communications → Modbus (Channel 1) → Register mapping → Target register 1..20
5.2.8
Modbus units
5.2.8.1
Mass flow unit
Description
Set the unit for mass flow values.
Setting Metric: Gram → g/s; g/min; g/h
Kilogram → kg/s; kg/min; kg/h; kg/d
Tonne → t/min; t/h; t/d
US: Pound → lb/s; lb/min; lb/h; lb/d
Short ton → STon/min; STon/h; STon/d
Ton (long ton) → T/h; T/d
Custom unit
Default
kg/h
Related
Path
Communications → Modbus (Channel 1) → Modbus units → Mass flow unit
5.2.8.2
Volume flow unit
Description
Set the unit for volume flow values.
Setting Metric:
Litre → l/s; l/min; l/h; l/d; Ml/d; hl/s; hl/min; hl/h; hl/d
m
3
→ m
3
/s; m
3
/min; m
3
/h; m
3
/d
US: Gallons → Ugal/s; Ugal/min; Ugal/h; Ugal/d; Mgal/d; gal/s; gal/min; gal/h; gal/d
Barrels → BBPS; BBPM; BBPH; BBPD; BOPS; BOPM; BOPH; BOPD; BLPS;
BLPM; BLPH; BLPD
ft
3
→ ft
3
/s; ft
3
/min; ft
3
/h; ft
3
/d
Custom unit
Default
m
3
/h