Siemens FST020 - On Delay; Off Delay; Channel 4 - Input;Output; Operation Mode

Setup
3.4 Inputs and outputs
FST020 Function manual
80 Function Manual, 09/2017, A5E42949526-AA
3.4.3.16
On delay
Description
Sets the time delay between alarm condition and activating the output.
Setting
0.0 s to 100.0 s
Default
0.0 s
Related
Path
Setup → Inputs and outputs → Channel 3 - relay → On delay
3.4.3.17
Off delay
Description
Set the time delay between resetting alarm condition and de-activating the output.
Setting
0.0 s to 100.0 s
Default 0.0 s
Related
Path
Setup → Inputs and outputs → Channel 3 - relay → Off delay
3.4.4
Channel 4 - input/output
3.4.4.1
Operation mode
Description
Shows the configured Operation mode. Use Change operation mode to set the mode.
Read only.
Setting
Off; Frequency output; Pulse output
Default
Off
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Operation mode