Siemens FST020 - 1 St Value; 2 Nd Value; 3 Rd Value

Setup
3.12 View 5
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
111
3rd Process Value
,
4th Process Value
,
5th Process Value
, and
6th Process Value
must be
configured.
Path
Setup → Local display → View 5 → View
3.12.3
1st value
Description
The display
1st Process Value
can be selected. This process value is shown in all view
types.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Default
Totalizer 1
Related
Path
Setup → Display → View 5 → 1st value
3.12.4
2nd value
Description
The display
2nd Process Value
can be selected.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Default
Density
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 5 → 2nd value
3.12.5
3rd value
Description
The display
3rd Process Value
can be selected.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium temperature
Default
Medium temperature