Siemens FST020 - Configuration of Test Blocks; About; Sensor Size

Setup
3.1 Sensor settings
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
37
3.1.12
Configuration of test blocks
3.1.12.1
About
Description
NOTICE
Configuration data overwrite error
Running the test block configuration procedure will overwrite any existing sensor
configuration.
Do not run the test block configuration procedure if configuration data is needed. Back up
and record data as necessary.
The wizard configures the device for use with the Siemens sensor test blocks including
sensor size and sensor path. It also allows for saving the setting.
3.1.12.2
Sensor size
Sensor size
Sensor path
A1
Path 1; Path 2
A2
Path 1; Path 2
B1
Path 1; Path 2
B2
Path 1; Path 2
B3
Path 1; Path 2
C1
Path 1; Path 2
C2
Path 1; Path 2
C3
Path 1; Path 2
D1
Path 1; Path 2
D2
Path 1; Path 2
D3
Path 1; Path 2
Save settings
After settings are complete, press the right arrow to save sensor test block settings.