Siemens FST020 - Preset; Alarm and Warning Limits

Setup
3.3 Totalizers
FST020 Function manual
60 Function Manual, 09/2017, A5E42949526-AA
Related
Path
Setup → Totalizers → Totalizer 1 → Reset
3.3.1.9
Preset
Description
Reset Totalizer 1 to selected preset value.
After selecting OK the user is asked for the PRESET value. The PRESET value units
depend on the selected Process value.
Therefore the range of the Preset value is for:
● Mass flow: -9999997952 kg to +9999997952 kg
● Volume flow: -9999997952 m³ to +9999997952 m³
Setting
Cancel; OK
Default
Cancel
Related
Path
Setup → Totalizers → Totalizer 1 → Preset
3.3.1.10
Alarm and warning limits
3.3.1.10.1 Upper alarm limit
Description
Alarm is triggered if Totalizer 1 value is above the limit.
Setting
Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Default Process value = Mass flow: +9999997952 kg
Process value = Volume flow: +9999997952 m³
Related
Path
Setup → Totalizers → Totalizer 1 → Alarm and warning limits → Upper alarm limit
3.3.1.10.2 Upper warning limit
Description
Warning is triggered if Totalizer 1 value is above the limit.