Siemens FST020 - Page 63

Setup
3.3 Totalizers
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
61
Setting Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Default Process value = Mass flow: +9999997952 kg
Process value = Volume flow: +9999997952 m³
Related
Path
Setup → Totalizers → Totalizer 1 → Alarm and warning limits → Upper warning limit
3.3.1.10.3 Lower warning limit
Description
Warning is triggered if Totalizer 1 value is below the limit.
Setting
Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Default Process value = Mass flow: -9999997952 kg
Process value = Volume flow: -9999997952 m³
Related
Path
Setup → Totalizers → Totalizer 1 → Alarm and warning limits → Lower warning limit
3.3.1.10.4 Lower alarm limit
Description
Alarm is triggered if Totalizer 1 value is below the limit.
Setting
Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Default Process value = Mass flow: -9999997952 kg
Process value = Volume flow: -9999997952 m³
Related
Path
Setup → Totalizers → Totalizer 1 → Alarm and warning limits → Lower alarm limit
3.3.1.10.5 Hysteresis
Description
Hysteresis sets the alarm and warning limits. The hysteresis is the distance between the
limits for activation and deactivation of an alarm/warning.