Siemens FST020 - Diagnostic Events; Active Diagnostic Events; Diagnostic Log; Clear Diagnostic Log

Maintenance and diagnostics
4.2 Diagnostic events
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
129
Related
Path
Maintenance and diagnostics → Identification → Sensor → Frontend variant
4.2
Diagnostic events
4.2.1
Active diagnostic events
Displays list of active events.
Path Maintenance and diagnostics → Diagnostic events → Active events
4.2.2
Diagnostic log
Displays list of logged events.
Path Maintenance and diagnostics → Diagnostic events → Diagnostic log
4.2.3
Clear diagnostic log
Description
The diagnostic log can be reset using this parameter.
Setting Cancel; OK
Default
Cancel
Related
When you confirm the reset by selecting OK, the
Diagnostic log
will be cleared.
Path
Maintenance and diagnostics → Diagnostic events → Clear diagnostic log
4.2.4
Acknowledge mode
Description
The system can be configured to acknowledge the alarms automatically when they are gone
(Auto), or it can be configured to require an acknowledgement from the operator (Manual).