Siemens FST020 - Number of Pulses to be Transmitted; Minimum Ringdown Delay; Electronic Time Delay

Setup
3.1 Sensor settings
FST020 Function manual
36 Function Manual, 09/2017, A5E42949526-AA
Related
Path
Setup → Sensor settings → Miscellaneous → Preamplifier Setting
3.1.11.2
Number of pulses to be transmitted
Description
The number of pulses to configure optimum signal processing.
Access level: Expert user only.
Setting
1 to 10
Default
5
Related
Path
Setup → Sensor settings → Miscellaneous → Number of pulses to be transmitted
3.1.11.3
Minimum ringdown delay
Description
The minimum ringdown delay is needed for optimized signal processing.
Access level: Expert user only.
Read only.
The minimum ringdown delay setting for optimized signal processing is:
2000.000122 μs
3.1.11.4
Electronic time delay
Description
The time delay induced by the DSL electronics.
Access level: Expert user only.
Read only.
The time delay induced by the DSL electronincs is:
0.519 μs