Siemens FST020 - Process Value 4; Maximum; Timestamp at Maximum; Minimum

Maintenance and diagnostics
4.5 Peak values
FST020 Function manual
154 Function Manual, 09/2017, A5E42949526-AA
4.5.4
Process value 4
4.5.4.1
Process value
Description
Assign the process value to be monitored.
Setting Disabled; Volume flow; Mass flow; Sound velocity; Flow velocity; Density; Medium temper-
ature; Kinematic viscosity; Totalizer 1
Default
Disabled
Related
If this parameter is set to any other setting than Disabled, parameters
Maximum value
,
Maximum value timestamp
,
Minimum value
,
Minimum value timestamp
, and
Reset logging
will be available.
Path
Maintenance and diagnostics → Peak values → Process value 4 → Assign process value
4.5.4.2
Maximum
Displays maximum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 4 → Maximum value
4.5.4.3
Timestamp at maximum
Displays timestamp when maximum value measured.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 4 → Maximum value
timestamp
4.5.4.4
Minimum
Displays minimum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 4 → Minimum value