Siemens FST020 - Timestamp at Maximum; Minimum; Timestamp at Minimum; Reset Peak Values

Maintenance and diagnostics
4.5 Peak values
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
153
4.5.3.3
Timestamp at maximum
Displays timestamp when maximum value measured.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path Maintenance and diagnostics → Peak values → Process value 3 → Maximum value
timestamp
4.5.3.4
Minimum
Displays minimum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 3 → Minimum value
4.5.3.5
Timestamp at minimum
Displays timestamp when minimum value measured.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path Maintenance and diagnostics → Peak values → Process value 3 → Minimum value
timestamp
4.5.3.6
Reset peak values
Description
This command is used to reset the logging of the recorded maximum and minimum values
monitored. The drag pointers will be set to the current value.
Setting Cancel; Ok
Default
Cancel
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 3 → Reset logging