Siemens FST020 - Inner Pipe Roughness; Inner Pipe Diameter; Upstream and Downstream Conditions; Disturbed Flow Profile Compensation

Setup
3.1 Sensor settings
FST020 Function manual
22 Function Manual, 09/2017, A5E42949526-AA
Related
Path
Setup → Sensor settings → Pipe settings → Liner settings → Liner sound velocity
3.1.3.8
Inner pipe roughness
Description
Roughness of inner pipe/liner material.
Setting
0.0 m to 0.01 m
Default
0.0001 m
Related
Path
Setup → Sensor settings → Pipe settings → Inner pipe roughness
3.1.3.9
Inner pipe diameter
Description
Read only. Calculated inner diameter of pipe (clamp-on).
Setting
Default
0.0 m
Related
Path
Setup → Sensor settings → Pipe settings → Inner pipe diameter
3.1.4
Upstream and downstream conditions
3.1.4.1
Disturbed flow profile compensation
Description
Disturbed flow profile compensation enable/disable
Setting
Enable; Disabled
Default
Disabled
Related
Path
Setup → Sensor settings → Upstream and downstream conditions → Disturbed flow profile
compensation