Siemens FST020 - Maximum; Timestamp at Maximum; Minimum; Timestamp at Minimum

Maintenance and diagnostics
4.5 Peak values
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
151
Related
If this parameter is set to any other setting than Disabled, parameters
Maximum value
,
Maximum value timestamp
,
Minimum value
,
Minimum value timestamp
and
Reset logging
will be available.
Path
Maintenance and diagnostics → Peak values → Process value 2 → Process value
4.5.2.2
Maximum
Displays maximum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 2 → Maximum value
4.5.2.3
Timestamp at maximum
Displays timestamp when maximum value measured.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path Maintenance and diagnostics → Peak values → Process value 2 → Maximum value
timestamp
4.5.2.4
Minimum
Displays minimum measured value.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 2 → Minimum value
4.5.2.5
Timestamp at minimum
Displays timestamp when minimum value measured.
Related
This parameter is only available if
Process value
is
not
set to Disabled.
Path
Maintenance and diagnostics → Peak values → Process value 2 → Minimum value
timestamp