Siemens FST020 - 4 Th Process Value

Setup
3.10 View 3
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
103
3.10.7
4th process value
Description
The display
4th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Volumeflow
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 3 → 4th Process Value
3.10.8
5th process value
Description
The display
5th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Totalizer 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path Setup → Display → View 3 → 5th Process Value
3.10.9
6th process value
Description
The display
6th Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default
Totalizer 1
Related
This parameter is only available if
View
is set to Six Values or Six Diagnostic Values.
Path
Setup → Display → View 3 → 6th Process Value