Siemens FST020 - View 1; View; 1 St Value; Graph Scale Mode

Setup
3.8 View 1
FST020 Function manual
92 Function Manual, 09/2017, A5E42949526-AA
3.8
View 1
3.8.1
View
Description
The display View 1 can be configured.
Setting Single value; Three values; 1 value and bargraph; 1 value and graph; Six values; Six diag-
nostic values
Default
Three values
Related
If Single value is selected,
1st process value
must be configured.
If Three values is selected,
1st process value
,
2nd process value
and
3rd process value
must be configured.
If 1 value and bargraph is selected,
1st process value
must be configured.
If 1 value and graph is selected,
1st process value
,
Trend scale mode
and
Trend log time
window
must be configured.
If Six values or Six diagnostic values is selected,
1st process value
,
2nd process value
,
3rd
process value
,
4th process value
,
5th process value
, and
6th process value
must be
configured.
Path
Setup → Local display → View 1 → View
3.8.2
1st value
Description
The display
1st process value
can be selected. This process value is shown in all view types.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Medi-
um temperature
Default
Volume flow
Related
Path
Setup → Local display → View 1 → 1st value
3.8.3
Graph scale mode
Description
Graph scale mode